Queclink
Queclink WS100 - Industrial switch
.
Item number VAR-827004388
Manufacturer Product Number: WS100
Taric/custom code: 8526919090
Item located in and dispatched from: Riedlingen, Germany
1. 4× Gigabit RJ45 , 1× Gigabit RJ45 uplink, 1× SFP
2. Redundant 12-55V DC power feed for hot-swap protection
3. Ruggedized and compact design
4. Built-in 35mm DIN Rail clip
The WS100 industrial Ethernet switch features four 1Gbps RJ45 ports for device connectivity, plus a dedicated Gigabit uplink port and a Gigabit SFP slot for long-distance backhaul. The DIP switches instantly enable or disable port isolation mode and extended-range mode—no software configuration required. The compact metal case snaps onto standard 35 mm DIN Rail and draws power from a redundant 12–55 V DC terminal block(V1/V2) with hot-swap protection and plug-and-play integration into any industrial power bus.
| Technical characteristic | Value |
|---|---|
| Item ID | 103801 |
| Condition | New |
| Model | WS100 |
| Manufacturer | Queclink |
| Manufacturing country | China |
| Content | 1 piece |
| Weight | 500 g |
| Customs tariff number | 8526919090 |
Physical interfaces
| Ethernet | 5 x RJ45 ports, 10/100/1000Mbps |
| Fiber | 1 x SFP port |
| Status LEDs | 1 x Power status LED 5 x RJ45 status LEDs 1 x SFP status LED |
| DIP switch | V/D/E mode |
| Power connection | 1 x 4 pin industrial terminal block with redundant V1 and V2 1 DC 2.1 jack The terminal block and the DC jack must not be powered simultaneously |
| Other | 1 x grounding screw |
Ethernet
| RJ45 | 5 x RJ45 ports, 10/100/1000Mbps |
| Fiber | 1 x SFP port |
| IEEE 802.3 series standards | 802.3, 802.3u, 802.3ab, 802.3z, 802.3x |
General Specifications
| Casing material | Steel |
| Dimensions | 120(W) x 87(D) x 30(H) mm |
| Weight | 441g |
| Mainboard power consumption | 4.96W(typical) |
| Mounting options | Desktop, wall mounting installation, DIN Rail installation |
| Operating Voltage | DC 12-55V |
| Operating Temperature | -40°C to 75°C |
| Operating humidity | 10% to 90% non-condensing |
| Certification | CE, FCC, RoHS compliant |
DIP function
| VLAN mode(V) | Enabled: ports 1-4 are isolated from each other; only communicate with uplink ports 5-6;
Disabled: all ports share one broadcast domain. |
| Default mode(D) | Non-functional. |
| Extend mode(E) | Enabled: ports 1-4 drop to 10Mbps to extend the transmission distance up to 250 m; Disabled: ports 1-4 support 10/100/1000 Mbps auto-negotiation and provide a transmission distance of up to 100 meters. |
Switch parameters
| Bandwidth | 12Gbps |
| Packet forwarding rate | 8.928Mpps |
| Packet buffer | 1Mbit |
| MAC address table | 2K |
Jumbo frame | Supported |
| Forward mode | Store and forward |
