Reyax

RYS8830_EVB: Small form factor & Ultra Low Power 1.8V UART/I2C Interface GNSS Antenna Module Evaluation Board EVB Version

Small form factor & Ultra Low Power 1.8V UART/I2C interface GNSS antenna module


Item number VAR-827002073

Manufacturer Product Number: RYS8830_EVB

Taric/custom code: 85177900


Available for immediate dispatch: ${ $store.getters.currentItemVariation.stock.net }
Expected dispatch delay beyond available stock: 2 to 4 weeks

Item located in and dispatched from: Riedliengen, Germany


GBP 31.85 *
Content 1 piece
Log in and get better prices. Or contact us and request B2B status.

* Excl. VAT excl. Shipping

Description

The REYAX RYS8830 is built on the high performance of the SONY CXD5605AGF GNSS engine. The RYS8830 modules utilize concurrent reception of GNSS systems offering high sensitivity in a small SMD form factor.

◆ SONY CXD5605AGF Engine

◆ Small SMD form factor 121mm^2

◆ Enhanced GNSS Filter and Low Noise Amplifier

◆ Ultra-low power consumption

◆ Up to Position accuracy 1.0 m CEP

◆ Embedded Antenna

Item ID 101711
Condition New
Model RYS8830_EVB
Manufacturer Reyax
Manufacturing country Taiwan
Content 1 piece
Weight 150 g
Net weight 100 g
Customs tariff number 85177900

Features

Item Min. Typical Max. Unit Condition
Power Supply Voltage 1.75 3.3 3.6 V VBATT
  0.9 1.8 1.95 V VDD_LDO_IN

GNSS continuous mode

Item Min. Typical Max. Unit Condition
Satellite acquisition Current 16 19   mA  
Satellite tracking Current 9 13   mA  
Idle Current   3.7   mA Waiting for command
Sleep2 mode current   200   uA  
Satellite acquisition Current   11.5   mA Use buck regulator
Satellite tracking Current   8.2   mA Use buck regulator
Idle Current   3.3   mA Use buck regulator
Sleep0 mode current   0.5   mA Use buck regulator
Sleep1 mode current   0.26   mA Use buck regulator
Sleep2 mode current   0.26   mA Use buck regulator

GNSS low power mode

Item Min. Typical Max. Unit Condition
Satellite tracking average
current
2.6   8.2 mA Use buck regulator
@GSOP command
Sleep1 and normal mode cycle
I2C slave         I2C clock : 400kHz

Address length : 7 bits

Slave address : 0x24

Default Baud Rate   115200   bps 8,N,1
Digital input level high 0.7*VDD   VDD+0.3 V VIH
Digital input level low -0.3   0.3*VDD V VIL
Digital output level high 0.8*VDD   VDD V VOH 2mA
Digital output level low 0   0.2*VDD V VOL 2mA
Flash size   8   M-bit  
GNSS Center Frequency   1561.098

1575.42

1602.5625

  MHz BeiDou

GPS

Glonass

Navigation update rate   1   Hz  
Accuracy   1   M Signal strength is -130dBm
Cold starts   35   Sec. Signal strength is -130dBm
Hot starts   1   Sec.  
Tracking Sensitivity   -161   dBm  
Hot starts Sensitivity   -160   dBm  
Cold starts Sensitivity   -147   dBm  
Operating Temperature -40 25 +85 ˚C  
Dimensions         11mm*11mm*2.2mm
Weight   0.43   g